Department of Mechanical Engineering

Awards and Accomplishments

Research Publication Details

S.No. Name of Authors Title of the Paper Name of journal Year of publication
1 Piyush Mahendru, Inder Kumar Bhat Optimization of erosion parameters of coated SS316L using Taguchi method IJIDeM 2023-24
2 Smriti Mishra, Jatinder Kumar, Hari Singh Effect of Tool Tip Profile and Tilt angle on Al8090/TiH2-Al2O3 Foam and its Mechanical Characterization JPME 2023-24
3 Ajit, Gianender Kajal, Pratibha Malik, Himanshu Garg, Rahul Lamba Thermophysical properties analysis of AL2O3, MgO & Go Nanofluids with water for solar still MTP 2023-24
4 Gianender Kajal, M.R. Tyagi, Gulshan Kumar Finite element analysis of residual stresses during incremental sheet forming of Ti-6Al-4V alloys using different tool path profiles SPRINGER 2023-24
5 Pradeep Kumar Mouria, Ranganath M. Singari, Reeta Wattal Microstructure and mechanical response of SiC and TiO2 particles reinforced friction stir welded AA7075 & AA2024 IJIDeM 2023-24
6 Pradeep Kumar Mouria, Ranganath M. Singari, Reeta Wattal Impact of tool pin profile on mechanical & microstructural properties of friction stir welded joints of AA2024 & AZ91D JMEPEG 2023-24
7 Pradeep Kumar Mouria, Ranganath M. Singari, Reeta Wattal Influence of rotational tool speed on metallurgical characterization of friction stir welded joint of AZ91D & AA2024 JAST 2023-24
8 Prashant Bhardwaj, Sujata Nayak, Arvind Tiwari & G N Tiwari An Improved Hottel-Whiller-Bliss Equation for the Nth Photo-Voltaic Thermal-Thermo-Electric Cooler Air Collectors Connected in Series: Exergy Analysis JREE 2023-24
9 Ajit, Harshit Pandey, Naveen Kumar Gupta Analysis of solar water desalination of hybrid nanofluids: an experimental study JTE 2023-24
10 Ajit, Gianender Kajal, Pratibha Malik, Himanshu Garg, Rahul Lamba An experimental investigation of gas tungsten arc welding aspects on stainless steel (SS304) using Taguchi method MTP 2023-24
11 Rajeev Ranjan, Sanjay Kumar Jha, Pradeep Kumar Mouria, Subhash Mishra Investigation of post weld heat treatment on Mechanical properties of low frequency vibration assisted SMAW mild steel welded joints IJIDeM 2023-24
12 Husain Mehdi, Joginder Singh, Pradeep Kumar Mouria, Subhash Mishra, and Chander Prakash Effect of Tool Pin Profile on Mechanical and Metallurgical Properties of the Friction Stir Welded Joint of AA6061 and AZ91D JMEPEG 2023-24

  • Mishra, S., Bhardwaj, P., Bhadauria, N., Vashishtha, P. (2023). Reliability Prediction and Its Simulation for a Friction Stir Processing Tool. In: Singh, R.P., Tyagi, M., Walia, R.S., Davim, J.P. (eds) Advances in Modelling and Optimization of Manufacturing and Industrial Systems. Lecture Notes in Mechanical Engineering. Springer, Singapore. DOI
  • Smriti Mishra, Abhishek Yadav, Prashant Bhardwaj, "An Experimental Analysis of Natural Heat Transfer between Rectangular Solid and Perforated Fins Having Different Perforation Characteristics." EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, Vol. 10, Issue 01, March 2023.
  • CFD analysis of Effect of journal bearing lubricated with non-Newtonian fluid, Tyagi, MR; Thakre, GD; IOP Conference Series: Materials Science and Engineering
  • Joginder Singh and Prateek, "Frequency and Static Structural Linear Analysis of Non-Flexible Pedestrian Iron Bridge by Simsolid Software", International Journal of Research, Volume XI, Issue XI, pp. 707-715, November/2022, ISSN NO: 2236-6124, www.ijrpublisher.com.
  • Joginder Singh and Prateek, "Remodelling of a Jet Engine Mounting Bracket using Structural Analysis and Topology Optimization", International Journal of Research, Volume XI, Issue XI, pp. 638-649, November/2022, ISSN NO: 2236-6124, www.ijrpublisher.com.

  • G.N.Tiwari, Prashant Bhardwaj, Sujata Nayak, Arvind Tiwari, "Optimization of series and parallel combination of N-SPVT air collectors based on overall thermal energy and exergy." International Journal of Renewable Energy Technology. DOI
  • G.N.Tiwari, Prashant Bhardwaj, Sujata Nayak, Arvind Tiwari, V.K. Dwivedi, "Thermal and Exergy Analysis of N-Semi-Transparent Photovoltaic Thermal (N-SPVT) Air Collectors Connected in Series/Parallel." International Journal of Renewable Energy Technology. DOI
  • Prashant Bhardwaj, Sujata Nayak, Arvind Tiwari and G. N. Tiwari, "Design and Simulation of a semi-transparent photovoltaic thermal (PVT) indirect solar dryer integrated with kitchen chimney using ANN technique." Indian Journal of Engineering and Materials Sciences, Volume 28 Issue 6 (Dec. 2021). (Scopus, SCI).
  • "Failure Phenomena In Hydrodynamic Bearing," Jai Prakash Sharma, M.R. Tyagi, G.D. Thakre; International Journal of Mechanical Engineering.
  • "Selection of Appropriate Range of Operating Parameters for Tribological Simulation of Journal Bearings on a Test Rig," Jai Prakash Sharma, M.R. Tyagi, G.D. Thakre; International Journal of Mechanical Engineering.
  • Ajit1 and Naveen Kumar Gupta, "Effect of Different Al2O3 nanofluid Concentrations on the Efficiency of Solar Water Desalination system with different flow rates." Journal of Thermal Engineering. DOI: 10.18186/thermal.1242844.
  • Ajit, Harshit Pandey, Naveen Kumar Gupta, "Productivity analysis of pyramid solar still with solid clay pots." DOI.
  • "Analysis of solar water desalination using hybrid nanofluids: An experimental study" (Accepted).
  • "Performance Enhancement of Pyramid-Shaped Solar Still Using Phase Change Material with Porous Material" (Accepted).
  • "Productivity Analysis of Pyramid Solar Still Using Phase Change Material and Hybrid Nanofluid" (Accepted).
  • "Productivity Improvement of Solar Still with Cemented Blocks" (Accepted).
  • "Identification of occupational health hazards in sheet metal industry through REBA and RULA method."
  • Kajal G., Ajit, and Malik P., "An Experimental Investigation of Gas Tungsten Arc Welding Aspects on Stainless Steel (SS304) Using Taguchi Method." Materials Today Proc., 2023. (Accepted).
  • Ajit, Kajal G., and Malik P., "Thermophysical Properties Analysis of Al2O3, MgO, and GO Nanofluids with Water for Solar Still." Materials Today Proc., 2023 (Accepted).
  • Dubey, V., Sharma, A.K., Vats, P., Pimenov, D.Y., Giasin, K., and Chuchala, D., "Study of a Multicriterion Decision-Making Approach to the MQL Turning of AISI 304 Steel Using Hybrid Nanocutting Fluid." Materials, 14(23), p.7207. (SCIE).
  • Dubey, V., Sharma, A.K., Vats, P., Pimenov, D.Y., "Prediction of surface roughness using machine learning approach in MQL turning of AISI 304 steel by varying nanoparticle size in the cutting fluid." Lubricants (SCIE).
  • Dubey, V., Sharma, A.K., Singh, B., "Optimization of machining parameters in chromium-additive mixed electrical discharge machining of the AA7075/5% B4C composite." Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(1), pp.104-113. (SCIE).
  • Dubey, V., Sharma, A.K., Kumar, H., and Arora, P.K., "Prediction of cutting forces in MQL turning of AISI 304 Steel using machine learning algorithm." Journal of engineering research (SCIE).
  • Dubey, V., Sharma, A.K., Kumar, H., and Arora, P.K., "An experimental investigation and multi-response optimization using hybrid MCDM technique in MQL turning of AISI 304 steel." Indian Journal of Engineering and Materials Sciences (Accepted) (SCIE).
  • Dubey, V., Sharma, A.K., Ramkumar J, "Cutting forces evaluation in turning of stainless steel by altering particle size of alumina in cutting fluid under MQL environment." Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (under review) (SCIE).
  • Mishra R, Dubey V, Singh RK, Sharma AK, Katiyar JK, "A novel conjugate heat transfer approach to determine the temperature distribution in a single-point cutting tool under different conditions." Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2022 (SCIE).
  • Dubey, V, Singh B, "To Investigate the Influence of Process Parameters on Material Removal Rate in Electric Discharge Machining of HCHCr Steel." BLB-International Journal of Science & Technology, ISSN: 0976-3074, Nov. 2015.
  • Dubey, V., Sharma, A.K, "A Short Review on Hybrid Nanofluid Machining." Advances in Materials Processes & Technologies (Taylor And Francis) Scopus Indexed.
  • Prasad, P., Dubey, V., Sharma A.K., "Surface Roughness Prediction of AISI 304 Steel in Nanofluid Assisted Turning Using Machine Learning Technique." Key Engineering Materials, Trans Tech 2022, Scopus Indexed.
  • Kajal G., Tyagi M.R., and G. Kumar, "A review on the effect of residual stresses in incremental sheet metal forming used in automotive and medical sectors." Materials Today Proc., 2022, DOI.
  • Kajal G., Tyagi M.R., and G. Kumar, "Finite Element Analysis of Residual Stresses during Incremental Sheet Forming of Ti-6Al-4V Alloys Using Different Tool Path Profiles" Advances in Engineering Design. Lecture Notes in Mechanical Engineering. Springer, Singapore, Aug. (2022). (In-Process).
  • Certification of participation and paper presented titles as "A systematic Review on Applications of 3D Food Printing" in International Conference ICRACI-4.0 organized at Manav Rachna University, Faridabad, during 04th-05th Feb. 2022.
  • Certification of participation and paper presented titles as "The role of residual stresses in correlation with process parameters of incremental sheet metal forming: A review on automotive and medical industry" in International Conference FLAME-2022 organized at Amity University, Noida during 03th-05th Aug 2022.
  • Certification of participation and paper presented titles as "Finite Element Analysis of Residual Stresses during Incremental Sheet Forming of Ti-6Al-4V Alloys Using Different Tool Path Profiles" in International Conference FLAME-2022 organized at Amity University, Noida, during 03th-05th Aug 2022.

  • Prashant Bhardwaj, "Design and Simulation of a Semi-transparent Photovoltaic Thermal (PVT) Indirect Solar Dryer Integrated with Kitchen Chimney Using ANN Technique" in "ICSE-2021" organized by Department of Mechanical Engineering, Engineering College Bikaner under TEQIP-III during 26-27 February 2021.
  • Prashant Bhardwaj, "Enviro-economic and Energy Matrices Analysis of Semi-transparent PVT Solar Dryer Integrated with Kitchen Chimney" in "ICSE-2021" organized by Department of Mechanical Engineering, Engineering College Bikaner under TEQIP-III during 26-27 February 2021.
  • Ajit1 and Naveen Kumar Gupta, "Progresses in Solar Still Technology with Phase Change Material." DOI.
  • Joginder Singh and M.R. Tyagi, "Effect of Angular Orientation of Continuous Fibers on the Extensional Properties of Carbon Fiber Composites," Lecture Notes in Mechanical Engineering, ISSN No.: 21954356, 21954364, Springer Nature. DOI, Sep 2020.
  • Dubey, V., Sharma, A.K., and Singh, R.K., "A Technological Review on Temperature Measurement Techniques in Various Machining Processes." Advances in Metrology and Measurement of Engineering Surfaces, pp. 55-67.
  • Dubey, V., Sharma, A.K., and Singh, R.K., "Study of various cooling methodology used in machining processes." Materials Today: Proceedings, 21, pp. 1572-1576.
  • Pandey, K., Dubey, V., Sharma, A.K., and Mital, A., "State of art on tribological behavior of nanoparticle enriched cutting fluid." Materials Today: Proceedings, 26, pp. 2586-2589.
  • Yadav, A., Dubey, V., Singh, R.K., and Sharma, A.K., "Effect of Temperature and Humidity on Tribological Properties of Rail and Wheel Using Pin-On-Disc." In Recent Advances in Smart Manufacturing and Materials, pp. 237-244, Springer, Singapore.
  • Vats, P., Singh, T., Dubey, V., and Sharma, A.K., "Optimization of machining parameters in turning of AISI 1040 steel using hybrid MCDM technique." Materials Today: Proceedings, 50, pp. 1758-1765.
  • Kisan, U., Dubey, V., Sharma, A.K., and Mital, A., "Synthesis of Groundnut Shell/Rice Husk Hybrid Composite–A Review." In IOP Conference Series: Materials Science and Engineering, Vol. 1116, No. 1, p. 012001, IOP Publishing.

  • Mishra S, Bhardwaj P. "Remaining Useful Life Estimation by Stochastic Markov Model and Monte-Carlo Simulation." International Journal of Industrial and Systems Engineering. DOI. (SCOPUS)
  • Prashant Bhardwaj, "Design & Simulation Of A Semiconductor Of A Semi-Transparent PVT Indirect Solar Dryer," in SOLARIS 2020 - National Conference on Sustainable Environment and Climate, at SMU Barabanki, U.P., on 7th to 9th Feb 2020.
  • "Prediction of Universal Joint Behavior Under Small Axial Loading Using FEM," Rahul Sharma*, Sumit Kumar Shaw, S. Somesh, Mukul Bhatia, Joginder Singh and Jai Prakash Sharma; Indian Journal of Science and Technology.
  • "Comprehensive Review on Hybrid Vehicle Powertrain," Mahajan, Shivam; Sharma, Jai Prakash; Aditya, K; Gupta, Himanshu; Singh, Kunal; Advances in Engineering Design: Select Proceedings of FLAME 2018.
  • Joginder Singh and M.R. Tyagi, "Variation of Shear Properties in Carbon Fiber Composites as Extensional Forces," Springer Nature Singapore Pte Ltd, Proceedings of International Conference in Mechanical and Energy Technology, Smart Innovation, Systems and Technologies 174. DOI, June 2020.
  • Joginder Singh, MR Tyagi, Gurpreet Singh, Ravi Dutt Sharma, "Design, Analysis and Manufacturing of Front Sprocket of a Bicycle using Carbon Fiber Reinforced Plastics," NFEST, IOP, Journal of Physics: Conference Series 1240 (2019) 012071. DOI, IOP Publishing.
  • "Effect Of Tyre Unbalance on Performance Of Vehicle." International Journal of Mechanical Engineering and Technology (IJMET), Volume 11, Issue 12, December 2020, pp. 12-18. Journal Impact Factor (2020): 11.2184 (Calculated by GISI). www.jifactor.com. ISSN Print: 0976-6340 and ISSN Online: 0976-6359. IAEME Publication Scope Database Indexed.
  • Garg H., Sehgal K., Lamba R., Kajal G. "A Systematic Review: Effect of TIG and A-TIG Welding on Austenitic Stainless Steel." Advances in Industrial and Production Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore, April (2019), pp 375-385. DOI.

  • Mishra S, Bhardwaj P, Badhauria N. "Reliability and Availability Analysis for A." 2018;13(6):116-126. (Scopus till 2017)
  • Singh H, Rawat H, Sadhra M, Bhardwaj P. "Cutting Tool Prognostic using Markov Model." Indian J Sci Technol. 2017;11(45):1-4. DOI (WOS)
  • Prashant Bhardwaj, "Simulation And Optimization Of A Hybrid Photovoltaic Thermal Greenhouse Dryer Using Soft Computing Technique," At National Conference On Recent Trends In Photovoltaic Technologies And Applications, On 24th August 2018 At Hi-Tech Institute Of Engg. & Tech.
  • Singh Joginder, Tyagi M.R., Katiyar A., Kajal G. "Design and manufacturing of a holding fixture to test the tensile strength of a flat specimen." International Journal of Applied Engineering Research. ISSN: 0973-4562, Research India Publications.
  • Guar K., Sahil, Ajit, Kajal G. "Productivity Analysis of Pyramid Solar Still Using Phase Change Material and Hybrid Nanofluid." Recent advances of Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore, Aug. (2022), (In-Process).
  • Joginder Singh and M.R.Tyagi, "Evaluation of Tensile Properties of Hot Rolled Carbon Steel Using Finite Element Analysis." Lecture Notes in Mechanical Engineering, ISSN No.: 21954356, 21954364, Springer Nature. DOI, April 2019.
  • Joginder Singh and M.R.Tyagi, "Comparative Study of Sheet Metal and Carbon Fibre Reinforced Composites Ceiling Fan Blade." Lecture Notes in Mechanical Engineering, ISSN No.: 21954356, 21954364, Springer Nature. DOI, June 2019.
  • Joginder Singh, "Prediction of Universal Joint Behavior Under Small Axial Loading Using FEM." Indian Journal of Science and Technology, Volume 12(9). DOI, March 2019, ISSN (Print) : 0974-6846 ISSN (Online) : 0974-5645.
  • Joginder Singh and M.R.Tyagi, "Virtual Analysis and Manufacturing of Flat Specimen of Carbon Fiber Composite for Computing Tensile Strength." International Journal of Engineering Sciences Paradigms and Researches (IJESPR), Vol. 48, Special Issue, TAME-2019, April 4-5, 2019, UGC Journal No.: 42581, ISSN Online No.: 2319-6564. www.ijesonline.com.
  • Pandey M, Pandey A., Ajit, Gianender. "Electricity generation using vertical axis wind turbine: design and development." International Journal of Advance Research in Science and Engineering. Vol. No. 06, Special Issue No. (02), Dec. 2017, pp. 234-44.
  • Mittal P., Gianender. "Wear Behaviour of Aluminium 7075 based Composites Reinforced with SiC, Red Mud and Al2O3." International Journal for Research in Applied Science & Engineering Technology (IJRASET). Volume 6 Issue IV, April 2018, pp.2802-16.
  • Yadav Rekha, Gianender. "Process Parameter Selection for Optimizing the Weld Pool Geometry of Stainless Steel (SS 202 & SS 316) of the TIG Welding using Taguchi Method." International Journal for Research in Applied Science & Engineering Technology (IJRASET), Volume 6 Issue IV, April 2018, pp.2674-83.
  • Yadav Rekha, Kajal G. "Process Parameter Selection for Optimizing the Mechanical Properties of Stainless Steel (SS 202 & SS 316) in the Gas Tungsten Arc Welding." International Journal for Research in Applied Science & Engineering Technology (IJRASET), Volume 6 Issue IV, April 2018, PP.2684-95.
  • Malik Pratibha, Gianender, Sharma J.P. "Textiles for protection against Electromagnetic Radiations: A review." International Journal of Engineering Research and Application (IJERA), Vol. 8, Issue 6 (Part -III) June 2018, pp 32-37.
  • Shivam, Singh Manjeet, Gianender. "A review on friction stir welding." National Conference ON Global Congress on Biotechnology, Nanotechnology, Energy and Environment, April 25-26th, 2018, DCRUST, Murthal.
  • Gianender. "A review on the effect of process parameters on submerged arc welding for joining steel grades specimen." International Conference on NEWTON, 08-10th June, 2018, at Seemant Institute of Technology, Uttarakhand, India.

  • Mishra S, Bhardwaj P, Bhadauria N. "Optimal Availability Analysis of Brake Drum Manufacturing System by using Markov Approach." 2016; 4(August):16-23.
  • Arora N, Bhardwaj P, Mishra S. "Optimal Availability Analysis of Drill Bit." 2017;5(Xii):2261-2266.
  • Bhardwaj P, Mishra S, Vashishtha P. "Remaining Useful Life (RUL) Estimation of a Turning Tool Using Statistical Trend Exploration Technique." 2016;(2):35-39.
  • Mishra S, Bhardwaj P, Badhauria N. "Reliability and availability analysis for a manufacturing network by using active redundancy," in International Conference on Recent Trends and Innovations in Mechanical Engineering, at KIET Group of institutions, Ghaziabad, on 20th to 21st July 2018.
  • Prediction of Mechanical and Wear Properties of Al-6061/MoS2 (Molybdenum Disulphide) Composites, Rinki Yadav, Jai Prakash Sharma, Gianender Kajal, Rekha Yadav; International Journal of Innovative Research in Science, Engineering and Technology, International Journal of Innovative Research in Science, Engineering and Technology.
  • Joginder Singh and M.R.Tyagi, "Analysis of Stresses and Deflections in Spur Gear," International Journal of Mechanical Engineering and Technology, ISSN No.: 09766340, 09766359, Volume 8, Issue 4, pp. 461–473, Article ID: IJMET_08_04_050, April 2017.
  • Joginder Singh and M.R.Tyagi, "Design and Manufacturing of a holding fixture to test the tensile strength of a flat specimen," International Journal of Applied Engineering Research ISSN 0973-4562 Volume 13, Number 6 (2018) pp. 1-6, Research India Publications, http://www.ripublication.com.
  • Joginder Singh, "Implementation of CATIA V5 in Modeling and Simulation of Workbench Vice," International Journal of Emerging Technologies in Engineering Research (IJETER) Volume 6, Issue 5, May (2018) www.ijeter.everscience.org.
  • Vineet Dubey, Balbir Singh, "Optimization of Process Parameters for Machining of AA7075/B4C Composite using Powder Mixed EDM" presented in International conference on emerging trends in Materials and Manufacturing Engineering (IMME 17), 10-12 March, 2017 at NIT Tiruchirappalli.
  • Dubey, V. and Kumar, R., 2018. "Optimization of Electrical Discharge Machining Parameters on Machining Inconel 718 with Copper Tungsten Electrode Using Taguchi Approach." Advanced Science, Engineering and Medicine, 10(7-8), pp.732-735.
  • Dubey, V. and Singh, B., 2018. "Study of material removal rate in powder mixed EDM of AA7075/B4C composite." Materials Today: Proceedings, 5(2), pp.7466-7475.
  • Ajit, Bhadana M., Gianender. "Occupational health hazards of welding workers: Piping Industry Perspective." International Journal of Emerging Trends in Science and Technology, Volume 4, Issue 09, September (2017), pp.6039-46, I.F-4.219.
  • Yadav P., Agarwal A.K., Mouria P.K., Gianender. "Reverse Engineering on Process Cycle Time in a Medium Scale Industry – Data Anthology." International Journal for Research in Applied Science & Engineering Technology (IJRASET), Volume 5 Issue XI, November 2017, pp.196-202, I.F-6.8.
  • Jai Prakash Sharma, Gianender, Yadav R. "Prediction of Mechanical and Wear Properties of Al-6061/MoS2 (Molybdenum Disulphide) Composites." International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Issue 8, August 2017, pp.15839-849.
  • Singh K., Gianender, Ajit. "Effect of Dielectric fluids used on EDM Performance: A Review." International Journal of Emerging Technologies in Engineering Research (IJETER). Volume 5, Issue 10, October (2017), pp.10-16, I.F-4.225.
  • Tarun Tiwari, Ajit, Gianender. "A Review of Working Fluid Combinations used in Diffusion Absorption Refrigeration Technologies." IJRASET. Volume 05, Issue XI, November, 2017, pp.2105-2111, I.F-6.887.
  • Mohit Solanki, Gianender. "Review on Chassis Reinforcement & Design." National Conference on Emanations of Sustainable Technologies in Engineering, Science, Management and Education (ESTESME-2017). April 01, 2017, by Mechanical Engineering Department at Manav Rachna University, Faridabad (Haryana, India).

Patent Data

    • FRUIT HARVESTING INCHWORM ROBOT (Oct-2022) - Ajit and Priyanka Gupta
    • Solar Powered Seawater Desalination Apparatus (Nov-2022) - Ajit and Gianender Kajal
    • Process Parameters of the friction Stir welding of Dissimilar aluminium alloys, Application Number: 202211009420, Publication Date: 04/03/2022, Smriti Mishra, Pradeep Kr. Mouria

Consultancy

S.No. Company Topic Funding Organization Type of Consultancy Amount (Rs.)
1 SCCI India Pvt. Ltd., Gurugram, Haryana Introduction to IC Engine Faculty J P Sharma Student Ankit Himanshu Training provided to 80 Sales Executive 4,00,000
2 Talbros Automotive Components Ltd. Product and Process Faculty J P Sharma Training provided To 64 Engineers 1,00,000

StudyPrograms Offered

Admission

Fee CalculatorFee Calculator

Contact Us

Icon location ADDRESS

Sector – 43, Aravalli Hills, Delhi – Surajkund Road, Faridabad – 121004, (Haryana), India

VIEW ON MAP
Back to School of Engineering